مهندسی عمران فردوسی

مهندسی عمران فردوسی

بررسی مقایسه‌ای استفاده از TMD و FTMD در سازه های برشی جهت کاهش دامنه ارتعاشات جانبی

نوع مقاله : مقاله پژوهشی

نویسندگان
دانشکده فنی مهندسی، دانشگاه قم.
چکیده
در این مقاله عملکرد سازه‌های برشی مجهز به میراگرهای جرمی تنظیم شده و میراگرهای جرمی اصطکاکی تنظیم شده در برابر زلزله‌های حوزه نزدیک و دور و همچنین تحت موج سینوسی مورد ارزیابی قرار گرفته‌اند. بدین منظور چهار ساختمان برشی درنظر گرفته شدند و تحلیلهای دینامیکی در دو حالت کنترل شده و کنترل نشده با استفاده از بیست رکورد زلزله حوزه دور و بیست رکورد زلزله حوزه نزدیک و همچنین تحت رکورد سینوسی بر روی آنها انجام گردید. نتایج به دست آمده نشان داد که کاهش پاسخ در ساختمانهای بلند، در زلزله حوز دور از زلزله حوزه نزدیک بیشتر است. همچنین میراگر جرمی تنظیم شده عملکرد بهتری در مقایسه با میراگر جرمی اصطکاکی تنظیم شده در کاهش پاسخ ها دارد. علاوه بر این، انتخاب نوع پاسخ های مورد نظر در بدست آوردن بهترین مقادیر برای پارامترهای میراگر بسیار اهمیت دارد؛ چرا که می‌تواند نتایج متفاوتی را در هر حالت نتیجه دهد. همچنین، سازه های مجهز به این میراگر ها برای بارگذاری لرزه‌ای، تحت رکورد های حوزه دور عملکرد بهتری از خود نشان می دهند.
کلیدواژه‌ها

عنوان مقاله English

Comparative study of the use of TMD and FTMD in shear structures to reduce the amplitude of lateral vibrations

نویسندگان English

masoud mahmoudabadi
Hossein Hasani
Faculty of Engineering, Qom University.
چکیده English

In this paper, the performance of shear structures equipped with tuned mass dampers and tuned friction mass dampers against near-field and far-field earthquakes and also under sine wave has been evaluated. For this purpose, four shear buildings were considered and dynamic analyses were performed on them in two controlled and uncontrolled modes using twenty far-field earthquake records and twenty near-field earthquake records and also under sine wave records. The results obtained showed that the response reduction in tall buildings is greater in far-field earthquakes than in near-field earthquakes. Also, the tuned mass damper has a better performance compared to the tuned friction mass damper in reducing responses. In addition, the selection of the type of desired responses is very important in obtaining the best values for the damper parameters; because it can yield different results in each case. Also, structures equipped with these dampers show better performance for seismic loading under far-field records.

کلیدواژه‌ها English

Shear building
Tuned mass damper
Friction tuned mass damper
far field and near field earthquake
Sinusoidal loading
ارسال نظر در مورد این مقاله
نام را وارد کنید.
نشانی پست الکترونیکی را به درستی وارد کنید.
وابستگی سازمانی را به درستی وارد کنید.
توضیحات را وارد کنید (حداقل 50 حرف)
CAPTCHA Image
شناسه امنیتی را به درستی وارد کنید.