Ferdowsi Civil Engineering

Ferdowsi Civil Engineering

Seismic Evaluation of Multi-Span Reinforced Concrete Bridges with Ultra High-Performance Concrete Piers Using Fragility Curves

Document Type : Original Article

Authors
Hamed Ghadimi Moghadam
Fereshteh Emami
Mohammad Reza Mansoori
Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
10.22067/jfcei.2024.84877.1261
Abstract
Bridges play a vital role in transportation, traffic management, and providing access to strategic locations, especially during crises. Earthquakes are unpredictable events that disrupt critical transportation routes and damage important structures. Innovative technologies, such as Ultra High-Performance Concrete (UHPC), offer hope for enhancing structural flexibility and reducing damage. UHPC, known for its uniformity, low permeability, and durability, increases the resistance of bridges to seismic forces and limits the spread of damage. One of the most effective methods for assessing seismic vulnerability is Fragility Analysis. This study evaluates urban bridges with UHPC concrete columns supporting cast-in-place concrete T-beam superstructures. The analysis was conducted using CSI Bridge software, and appropriate ground motion records were selected for Incremental Dynamic Analysis (IDA) and damage level calculations. The results indicate that the probability of damage exceeding a certain threshold in UHPC concrete piers is lower compared to those made of ordinary concrete. Examining damage intensity levels reveals that high-performance concrete improves performance by 7% in the worst-case scenario and up to 26% in the best-case scenario compared to ordinary concrete.
Keywords
Bridge
Ultra High-Performance Concrete
Incremental Dynamic Analysis
Fragility Curve
Damage index
 [1] A. Caner, A.M Yanmaz, A. Yakut, O. Avsar, T. Yilmaz, “Service Life Assessment of Existing Highway Bridges with No Planned Regular Inspections,” Journal of Performance of Constructed Facilities, vol. 22 ,pp. 108–114, (2008). doi.org/10.1061/(ASCE)0887-3828(2008)22:2(108)
[2] C. Huang, J. Song, N. Zhang, G. C. Lee, M. Asce, “Seismic Performance of Precast Prestressed Concrete Bridge Girders Using Field-Cast Ultrahigh-Performance Concrete Connections,” Journal of Bridge Engineering, vol. 24, no. 6, (2019). doi.org/10.1061/(ASCE)BE.1943
[3]M. Zhou, W. Lu, J. Song, G. C. Lee, “Application of Ultra-High Performance Concrete in bridge engineering,” Construction and Building Materials, vol. 186, pp. 1256–1267, (2018). doi:10.1016/j.conbuildmat.2018.08.036
[4] M. A. Bajaber, I. Y. Hakeem, “UHPC evolution, development, and utilization in construction: a review,” Journal of Materials Research and Technology, vol. 10, pp. 1058–1074, (2021). doi:10.1016/j.jmrt.2020.12.051
[5] A. K. Akhnoukh, C. Buckhalter, “Ultra-high-performance concrete : Constituents, mechanical properties, applications, and current challenges,” Case Studies in Construction Materials, vol. 15, (2021).
doi.org/10.1016/j.cscm.2021.e00559
[6] M. Tazarv, M. S. Saiid, “UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zones,” Engineering Structures, vol. 99, pp. 413–422, (2015). doi:10.1016/j.engstruct.2015.05.018
[7] Z. Haber, B.J. F. Munoz, I. De la Varga, B. A. Graybeal,“Bond characterization of UHPC overlays for concrete bridge decks: Laboratory and field testing,” Construction and Building Materials, vol. 190, pp. 1056–1068, (2018). doi.org/10.1016/j.conbuildmat.2018.09.167
[8] Y. Zhang, Y. Zhu, M. Yeseta, D. Meng, X. Shao, Q. Dang, G. Chen, “Flexural behaviors and capacity prediction on damaged reinforcement concrete (RC) bridge deck strengthened by ultra-high performance concrete (UHPC) layer,” Construction and Building Materials, vol. 215, pp. 347–359, (2019). doi.org/10.1016/j.conbuildmat.2019.04.229
[9] M. Ye, M., Z. Guo, C. Chen, Y. Chen, “Shaking table test study on seismic performance of UHPC rectangular hollow bridge pier,” Composite Structures, vol. 275, pp. 114435, (2021). doi:10.1016/j.compstruct.2021.114435
[10] X. Zhang, Y. Lu, X. Wu, P. Wang, R. Li, Y. Liu, C. Shen, H. Zhang, D. Zhang, “Constitutive model for ultra-high performance concrete (UHPC) considering the size effect under cyclic compressive loading,” Construction and Building Materials, vol. 368, p. 130499, (2023). doi.org/10.1016/j.conbuildmat.2023.130499
[11]S. S. Zhang, J. J. Wang, G. Lin, T. Yu, T., D. Fernando, “Stress-strain models for ultra-high performance concrete (UHPC) and ultra-high performance fiber-reinforced concrete (UHPFRC) under triaxial compression,” Construction and Building Materials vol. 370, p. 130658, (2023). doi.org/10.1016/j.conbuildmat.2023.130658 
[12] M. Gholhaki, A. Soleymani, O. Rezay far, “Determining Coefficient Behavior of Reinforced Moment Frame Having the Steel Plate Shear Wall using incremental Non-linear Dynamic Analysis,” Journal of Ferdowsi Civil Engineering, vol. 32, no. 4, pp. 13-30, (2019). doi:10.22067/civil.v32i4. 62958. (In Persian).
[13] T. Abbasi, B. Navayi Neya , L. Kalani sarokolayi, “Effect of Far and Near Fault Erathquake on Non-niform Excitation of Concrete Gravity Dams,” Journal of Ferdowsi Civil Engineering, vol. 32, no. 2, pp. 61-82, (2019). doi:10.22067/civil.v32i2.66860. (In Persian).
[14] L Kalani sarokolayi, L. Khanmohammadi, B. Navayi, “Concrete Cubic Ground Tanks with Base Seperator Under the Transitional and Rotational Components of Earthquake. ” Journal of Ferdowsi Civil Engineering, vol. 36, no. 4, pp. 35-54, (2023).doi10.22067/JFCEI.2023.80361.1206  (In Persian)
 [15] P. Esmaeiltabar, H. Khosravi, J. Vaseghi, “A Simplified Model for Dual Wall-Frame System,” Journal of Ferdowsi Civil Engineering, vol. 35, no. 1, pp. 31-44, (2022). doi:10.22067/Jfcei.2022.74215.1102. (In Persian)
[16] M. Shinozuka, M. Q.Feng, H. K. Kim, S. H. Kim, “Nonlinear Static Procedure for Fragility Curve Development,” Journal of Engineering Mechanics, vol. 126, no. 12, (2000).
doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1287)
[17] R. V. Whitman, E. H. Vanmarcke, F. Asce,          M. Asce, R. L. de Neufville, J. E. Brennan,.I, C. A. Cornell, J. M. Biggs, A. Asce, “Seismic design decision analysis,” Journal of the Structural Division, vol. 101no. 5, pp. 1067-1084, (1975). doi.org/10.1061/JSDEAG.0004049
[18] M. Shinozuka, “Development of bridge fragility curves. Proceedings of the US-Italian Workshop on Seismic Evaluation and Retrofit, Multidisciplinary Center on Earthquake Engineering Research, pp. 93-99, (1998).
[19] M. Abbasi, B. Zakeri, G. G. Amiri, “Probabilistic Seismic Assessment of Multiframe Concrete Box-Girder Bridges with Unequal-Height Piers,” Journal of Performance of Constructed Facilities, p. 04015016, (2015). doi:10.1061/(asce)cf.1943-5509.0000753
[20] A. Aviram, K. R, Mackie, C. Florida, “Guidelines for Nonlinear Analysis of Bridge Structures in California,” Pacific Earthquake Engineering Research Center, (2008).
https://peer.berkeley.edu/sites/default/files/web_peer803_ady_aviram_kevin_r._mackie_bozidar_stojadinovic.pdf
[21] J. B Mander, M. J. N. Priestley, R. Park, “Theorical Strss-Strain Model for Confined Concrete,” Journal of Structural Engineering, vol. 114, no. 8, pp. 1804–1826, (1988). doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
[22] Kaviani.Peyman, Zareian. Farzin, Taciroglu. Ertugrul, “Performance-Based Seismic Assessment of Skewed Bridges,” Technical Report, PEER, (2014) . dx.doi.org/10.13140/2.1.1586.0007
 [23] X. Liang, K. M. Mosalam, “Performance-Based Robust Nonlinear Seismic Analysis with Application to Reinforced Concrete Highway Bridge Systems,” Pacific Earthquake Engineering Research Center, (2016). dx.doi.org/10.13140/RG.2.2.20197.09440
[24] ASCE/SEI. “Seismic Evaluation and Retrofit of Existing Buildings”, American Society of Civil Engineers, no. 41-17, (2017)
[25] Islamic Republic of Iran Management and Plannig Organization .Standard Loads for Bridges. no 139. (In Persian)
[26] Islamic Republic of Iran Management and Plannig Organization Road and Railway Bridges Seismic Resistant Design code, No 463 (In Persian)
[27] The Islamic Republic of Iran Vice Presidency for Strategic Planning and Supervision .The Code of Practice for the analysis and Design of Concrete Bridges.No 389 (In Persian)
[28] “AASHTO LRFD Bridge Design Specifications,” American Association of State Highway and Transportation Officials, Washington, D.C.: American Association of State Highway and Transportation Officials, (2008)
[29] Roudgari, S. Aziminezhad, A. Seyed Razaghi, M. Emami,f. (2019). “Seismic Fragility Curves of Multi-Span Highway Bridges Considering Multiple Damage Parameters”. International Institute of Earthquake Engineering and Seismology (IIEES) (In Persian)
 [30] J. Pereiro-Barceló, J. L. Bonet; B. Martínez-Jaén, B. Cabañero-Escudero, “Design Recommendations for Columns Made of Ultra-High-Performance Concrete and NiTi SMA Bars,” Buildings, vol. 13, p. 991, (2023). doi.org/10.3390/buildings13040991
[31] N. Naeimi, M. A. Moustafa, “Analytical Stress–Strain model for steel spirals-confined UHPC,” Composites Part C: Open Access, vol. 5, p. 100130, (2021). doi.org/10.1016/j.jcomc.2021.100130
[32] Z. B. Haber, A. Foden, M. McDonagh, J. Ocel, K. Zmetra, B. Graybeal, “Design and Construction of UHPC-Based Bridge Preservation and Repair Solutions,” Federal Highway Administration, (Washington, DC: 2022) doi.org/10.21949/1521867.
[33] J. Dai, D. Wang, X-Y.Chen, R. Zhang, Z-G. Sun, “Assessment of an optimal intensity measure for isolated bridges based on the geometric mean of the response spectrum” (2022).
DOI:10.21203/rs.3.rs-2177127/v1
 [34] FEMA, 2009, Quantification of Building Seismic Performance Factors, FEMA  P-695, prepared by Applied Technology Council for the Federal Emergency Management Agency, Washington, D.C.
[35] R. Akbari, “Seismic fragility analysis of reinforced concrete continuous span bridges with irregular configuration,” Structure and Infrastructure Engineering, vol. 8, no. 9, pp. 873–889, (2012). doi:10.1080/15732471003653017
[36] Azarbonyad, F. Definition, explanation and how to draw fragility curves. 2020. Books (In Persian)
 [37] HAZUS, 1997. “Earthquake loss estimation methodology,”Technical Manual. Washington, DC: National Institute of Building for the Federal Emergency Management Agency.
 
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.