Xinxian, Z., Xiaolei, H., Jing, J., Yongle, Q., Chao, H., "Component-level performance-based seismic assessment and design approach for concrete moment frames", The Open Civil Engineering Journal, Vol. 10, No. 1, (2016).
2. Siahos, G., Dritsos, S., "Procedural assumption comparison for old buildings via pushover analysis including the ASCE 41 update", Journal of Earthquake Spectra, Vol. 26, No. 1, pp. 187–208, (2010).
3. Acun, B., Sucuoglu, H., "Performance of reinforced concrete columns designed for flexure under severe displacement cycles", Journal of ACI Structural, Vol. 107, No. 3, pp. 364, (2010).
4. Acun, B., Sucuoglu, H., "Evaluation of the performance limit states of reinforced concrete columns in view of experimental observations", Journal of Teknik Dergi, Vol. 22, No. 3, pp. 5523–5541, (2011).
5. Ricci, P., Verderame, G. M., Manfredi, G., "ASCE/SEI 41 Provisions on deformation capacity of older-type reinforced concrete columns with plain bars", Journal of Structural Engineering, Vol. 139, No. 12, pp. 4013, (2012).
6. Hacking, I., "The emergence of probability: A philosophical study of early ideas about probability", Induction and Statistical Inference, Cambridge University Press, (2006).
7. Dolsek, M., "Incremental dynamic analysis with consideration of modeling uncertainties", Journal of Earthquake Engineering and Structural Dynamics, Vol. 38, No. 6, pp. 805–825, (2009).
8. Vamvatsikos, D., Fragiadakis, M., "Incremental dynamic analysis for estimating seismic performance sensitivity and uncertainty", Journal of Earthquake Engineering and Structural Dynamics, Vol. 39, No. 2, pp. 141–163, (2010).
9. Kazantzi, A. K., Vamvatsikos, D., Lignos, D. G., "Seismic performance of a steel moment-resisting frame subject to strength and ductility uncertainty", Journal of Engineering Structures, Vol. 78, pp. 69–77, (2014).
10. Lignos, D. G., Krawinkler, H., "Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading", Journal of Structural Engineering, Vol. 137, No. 11, pp. 1291–1302, (2010).
11. Asgarian, B., Ordoubadi, B., "Effects of structural uncertainties on seismic performance of steel moment resisting frames", Journal of Constructional Steel Research, Vol. 120, pp. 132–142, (2016).
12. Hajirasouliha, I., Pilakoutas, K., Mohammadi, R. K., "Effects of uncertainties on seismic behaviour of optimum designed braced steel frames", Journal of Steel and Composite Structures, Vol. 20, No. 2, pp. 317–335, (2016).
13. Norouzi, A. H., Gerami, M., "Quantifying response variability of steel moment frames due to seismic uncertainties", Asian Journal of Civil Engineering, Vol. 20, No. 4, pp. 503-514, (2019).
14. Piluso, V., Pisapia, A., Castaldo, P., Nastri, E., "Probabilistic theory of plastic mechanism control for steel moment resisting frames", Structural Safety, Vol. 76, pp. 95-107, (2019).
15. Federal Emergency Management Agency, F., "FEMA P695: Quantification of building seismic performance factors", Washington, (2009).
16. Gupta, A., Krawinkler, H., "Seismic demands for the performance evaluation of steel moment resisting frame structures", Stanford University, (1999).
17. McKenna, F., "OpenSees: Open system for earthquake engineering simulation", Berkeley University of California, www.opensees.berkeley.edu, (2003).
18. Timler, P. A., Kulak, G. L., "Experimental study of steel plate shear walls", Structural Engineering Report No. 114, Department of Civil Engineering, University of Alberta, Edmonton, Canada, (1983).
19. Structural Engineers Association of California, "SEAOC Blue Book: Recommended Lateral Force Requirements and Commentary", Structural Engineers Association of California, Sacramento, (1999).
20. American Society of Civil Engineers, "ASCE 7-16: Minimum design loads and associated criteria for buildings and other structures", American Society of Civil Engineers, (2016).
21. Federal Emergency Management Agency, F., "FEMA356: Prestandard and commentary for the seismic rehabilitation of buildings", Washington, (2000).
22. Ellingwood, B. R., Kinali, K., "Quantifying and communicating uncertainty in seismic risk assessment", Journal of Structural Safety, Vol. 31, No. 2, pp. 179–187, (2009).
23. Kinali, K., Ellingwood, B. R., "Seismic fragility assessment of steel frames for consequence-based engineering", Journal of Engineering Structure, Vol. 29, No. 6, pp. 1115–27, (2007).
24. Sadowski A. J, Rotter J. M, "Solid or shell finite elements to model thick cylindrical tubes and shells under global bending", International Journal of Mechanical Sciences, Vol. 74, pp. 143-153, (2013).
25. Sadowski A. J, Rotter J. M, Reinke T, Ummenhofer T, "Statistical analysis of the material properties of selected structural carbon steels", Structural Safety, Vol. 53, pp. 26-35, (2015).
26. Porter, K. A., Beck, J. L., Shaikhutdinov, R. V., "Investigation of sensitivity of building loss estimates to major uncertain variables for the van nuys test bed", University of California, Berkeley, (2002).
27. Melchers, R. E., "Structural reliability analysis and prediction", Wiley, New York, (1999).
28. JCSS., "Probabilistic model code-part 1; basis of design (12th draft)", Joint Committee on Structural Safety, (2001).
29. Hossain, M. R., Ashraf, M., Padgett, J. E., "Risk-based seismic performance assessment of Yielding Shear Panel Device", Engineering Structures, Vol. 56, pp. 1570-1579, (2013).
)
ارسال نظر در مورد این مقاله