Investigation of the Stability and Vibration of Cracked Columns under Compressive axial Load

Document Type : پژوهشی

Authors

1 Department of Civil Engineering, Ghermi Branch, Islamic Azad University, Ghermi, Iran.

2 Department of Structural Engineering, Faculty of Civil Engineering, University of Tabriz, Tabriz, Iran

3 Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran.

Abstract

In this paper, a new analytical method is proposed to study the effect of crack and axial load on vibration behavior and stability of the cracked columns. Using the local flexibility model, the crack has been simulated by a torsional spring with connecting two segments of column in crack location. By solving governing eigenvalue equation, the effect of crack parameters and axial load on the natural frequencies and buckling load as well as buckling load are investigated. The results show that the presents of crack cause to reduction in natural frequencies and buckling load whereas this reduction is affected by the location and depth of the crack. Furthermore, the tensiel and compressive axial load increase and decrease the natural frequencies, respectively. In addition, as the compression load approaches to certain value, the fundamental natural frequency reaches zero and instability occurs. The accuracy of the model is validated through the experimental data reported in the literature.

Keywords


1. Krauberger, N., Bratina, S., Saje, M., Schnabl, S., Planinc, I.; "Inelastic buckling load of a locally weakened reinforced concrete column", Engineering Structures, Vol. 34, pp. 278–288, (2011).
2. Gurel, M., Kisa, M., "Buckling of Slender Prismatic Columns with a Single Edge Crack under Concentric Vertical Loads", Turkish J. Eng. Env. Sci., Vol. 29, pp. 185-193, (2005).
3. Jiki, P. N., "A Finite element java program for stability analysis of pre- cracked beam-columns", Indian J. Edu. Inf. Manage., Vol. 1, pp. 49-55, (2012).
4. Jiki, P. N., Karim, U., "A Numerical model for stability of fre-cracked beam-columns", 1st International Technology, Education and Environment Conference, (2011).
5. Vadillo, G., Loya, J. A., Fernandez-Saez, J., "First order solutions for the buckling loads of weakened Timoshenko columns", Comput. Math. Appl. Vol. 64, pp. 2395-2407, (2012).
6. Nikpour, K., "Buckling of cracked composite columns", Int. J. Solids Structures, Vol. 26, pp. 71-86, (1990).
7. Anifantis, N., Dimaragonas, A., "Stability of columns with a single crack subject to follower and vertical loads", Int. J. Solids Structures, Vol. 19, pp. 281-291, (1981).
8. Rahai, A.R., Kazemi, S., "Buckling analysis of non-prismatic columns based on modified vibration modes", Commu. Nonlinear Sci. Numer. Simul. Vol. 13, pp. 1721-1735, (2008).
9. Deliang, C., Wenting W., Feng L., "Vibration analysis method of cracked beam based on the principle of energy", Applied Mechanics and Materials Vols. 94-96, pp. 1633-1637, (2011).
10. Guirong, Y., Alessandro, D., Emiliano, M., Ruoqiang, F., "A novel approach to detecting breathing-fatigue cracks based on dynamic characteristics", Journal of Sound and Vibration, Vol. 332, pp. 407–422, (2013).
11. Ma’en, S., Eric A. B., "Natural frequencies and critical loads of beams and columns with damaged boundaries using Chebyshev polynomials", Int. J. of Engineering Science, Vol. 48, pp. 862–873, (2010).
12. Gürkan, Ş., Hasan, Ö., Mustafa, S., "Dynamic stability of multi-span frames subjected to periodic loading", Journal of Constructional Steel Research, Vol. 70, pp. 65–70, (2012).
13. Seong-Min, K., Yoon-Ho, C., "Vibration and dynamic buckling of shear beam-columns on elastic foundation under moving harmonic loads", International Journal of Solids and Structures, Vol. 43, pp. 393–412, (2006).
14. Jiki, P.N., "Buckling analysis of pre-cracked beam-columns by Liapunov’s second method", European Journal of Mechanics A/Solids, Vol. 26, pp. 503–518, (2007).
15. Kisa, M., "Vibration and stability of multi-cracked beams under compressive axial loading", International Journal of the Physical Sciences, Vol. 6(11), pp. 2681-2696, (2011).
16. Caddemi, S., Caliò, I., "The influence of the axial force on the vibration of the Euler–Bernoulli beam with an arbitrary number of cracks", Arch Appl Mech, Vol. 82, pp., 827–839, (2012).
17. Jena, P. K., Thatoi, D. N., Nanda, J., Parhi, D. R. K., "Effect of damage parameters on vibration signatures of a cantilever beam", Procedia Engineering, Vol. 38, pp. 3318 – 3330, (2012).
18. Yazdchi, K., Gowhari Anaraki, A. R., "Carrying capacity of edge-cracked columns under concentric vertical loads", Acta Mech., Vol. 198, pp. 1–19, (2008).
19. Ranjbaran, A., Hashemi, S., Ghaffarian, A. R., "A new approach for buckling and vibration analysis of cracked column", IJE Transactions A: Basics, Vol. 21, pp. 225-231, (2008).
20. Evren Toygar, M, Kiral, Z., Onur, S., Yusuf, A., "Effect of interface crack on lateral buckling behavior and free vibration response of a sandwich composite beam", J. of Composite Materials, Vol. 1, pp. 1-9,( 2012).
21. Binici, B., "Vibration of beams with multiple open cracks subjected to axial force", Journal of Sound and Vibration, Vol. 287, pp. 277–295, (2005).
22. Okamura, H., Liu, H. W., Chu, C., Libbowitz, H., "A Cracked column under compression", Engineering Fracture Mechanics, Vol. 1, pp. 547-564, (1969).
23. Ricci, P., Viola, E., "Stress intensity factors for cracked T-sections and dynamic behaviour of
T-beams", Engineering Fracture Mechanics, Vol. 73, pp. 91–111, (2006).
24. Tada, H., Paris, P., Irwin, G.R., "The Stress Analysis of Cracks Handbook", ASME Press, New York, (2004).
25. Vakil Baghmisheh, M.T., Peimani M., Homayoun Sadeghi, M., Ettefaghb, M.M., Fakheri Tabrizi, A., "A hybrid particle swarm–Nelder–Mead optimization method for crack detection in cantilever beams", Applied Soft. Computing,Vol. 12, pp. 2217–2226, (2012).
26. Surya, N., Patnaik, Dale, A. Hopkins, "Strength of Materials", Elsevier, New York, (2004).
CAPTCHA Image