1. Anderson, J. and Bertro, V.; "Uncertainties in Establishing Design Earthquake", Journal of Structural Engineering, ASCE, Vol. 113 No. 8, pp. 1709-1724, )1987(.
2. Hall, J. F.; "Seismic Response of Steel Frame Buildings to Near-Fault Ground Motions", A report of the California Institute of Technology, Report No.EERL 97-05, Pasadena, California, )1997(.
3. Alavi, B. and Krawinkler, H.; "Effects of Near-Fault Ground Motions on Frame Structures", A report of The John A. Blume Earthquake Engineering Center Department of Civil and Environmental engineering Stanford University, California, Report No. 138, )2001(.
4. Timler, P. A. and Kulak, G. L.; "Experimental Study of Steel Plate Shear Walls", Structural Engineering Report No. 114, Department of Civil Engineering, University of Alberta, Edmonton, Alberta, Canada, )1983(.
5. Sabouri-Ghomi, S. and Roberts, T. M.; "Nonlinear Dynamic Analysis of Thin Steel Plate Shear Walls", Computers and Structures, Vol. 39(1/2), pp. 121–127, (1991).
6. Sabouri-Ghomi, S. and Roberts, T. M.; "Nonlinear Dynamic Analysis of Steel Plate Shear Walls including Shear and Bending Deformations", Engineering Structures Vol. 14, No. 5, pp. 309–317, )1992(.
7. Roberts, T. M. and Sabouri-Ghomi, S.; "Hysteretic Characteristics of Unstiffened Plate Shear Panels", Thin Walled Structures, Vol. 12, pp. 145–162, )1991(.
8. Roberts, T. M. and Sabouri-Ghomi, S.; "Hysteretic Characteristics of Unstiffened Perforated Steel Plate Shear Panels", Thin Walled Structures, Vol. 14, pp. 139–151, )1992(.
9. Rezai, M.; "Seismic Behavior of Steel Plate Shear Walls by Shake Table Testing", Ph.D Dissertation, Department of Civil Engineering, University of British Columbia, Vancouver, Canada, (1999).
10. Lubell, A.S., Prion, H.G.L., Ventura, C.E., Rezai, M.; "Unstiffened Steel Plate Shear Wall Performance under Cyclic Loading", ASCE, Journal of Structural Engineering, pp. 453-460, April (2000).
11. Astaneh-Asl, A. and Zhao, Q.; "Cyclic Behavior of Steel Shear Wall Systems", Proceedings, Annual Stability Conference, Structural Stability Research Council, April,) 2002(.
12. Anjan K. Bhowmick, Robert G. Driver and Gilbert Y. Grondin, "Seismic analysis of steel plate shear walls considering strain rate and P_delta effects", Journal of Constructional Steel Research, Vol. 65, pp. 1149_1159, ScienceDirect, )2009(.
13. Canadian Standards Association, CAN/CSA-S16-01. Limit States Design of Steel Structures. (Ontario, Canada): CSA, )2001(.
14. American Institute of Steel Construction (AISC), Seismic Provisions for Structural Steel Building. Chicago (IL, USA): AISC, )2005(.
15. Seismosignal, Ver. 2.1, University of Berkley California, USA, )2001(.
16. قلهکی، مجید، "بررسی رفتار دیوارهای برشی فولادی شکل پذیر و اثر نوع اتصال تیر به ستون بر آنها"، رسالهی دکتری سازه، دانشکدهی مهندسی عمران دانشگاه صنعتی خواجه نصیرالدین طوسی، (1386).
17. سجادی، رامین و صبوری، سعید، "تعیین ممان اینرسی لازم برای جلوگیری از کمانش کلی در دیوارهای برشی فولادی با سخت کننده با استفاده از روابط تحلیلی"، ششمین کنفرانس بینالمللی زلزلهشناسی و مهندسی زلزله، 26 تا 28 اردیبهشت (1390).
18. مبحث ششم مقررات ملی ساختمان ایران (بارهای وارد بر ساختمان)،(1388).
19. آیین نامهی طراحی ساختمآنها در برابر زلزله، استاندارد 2800، ویرایش 3، مرکز تحقیقات ساختمان و مسکن، (1384)
20. مبحث دهم مقررات ملی ساختمان ایران (طرح و اجرای ساختمآنهای فولادی)، (1388).
Send comment about this article