پیش بینی مقاومت فشاری بتن های حاوی میکروسیلیس و پلیمر استایرن بوتادین به‌وسیلۀ مدل ریاضی

نوع مقاله : یادداشت پژوهشی

نویسندگان

1 شهید رجایی

2 دانشگاه تربیت دبیر شهید رجایی

چکیده

چکیده این مقاله، تأثیرات متقابل میکروسیلیس و پلیمر استایرن بوتادین (SBR) را بر مقاومت فشاری بتن بررسی می نماید. تحلیل نتایج مقاومت فشاری 32 مخلوط بتنی با 2 نسبت آب به مواد سیمانی (45/0 و 35/0) و چهار درصد جایگزینی میکروسیلیس ( 10%، 5/7%، 5%، 0% ) و چهار درصد پلیمر استایرن بوتادین (15%، 10%، 5%، 0% ) بررسی شده است. یک مدل ریاضی براساس قانون آبرامز، بهمنظور پیش‌بینی مقاومت بتن‌های حاوی SBR و میکروسیلیس پیشنهاد شده است. این مدل ساده، ممکن است به‌عنوان راهنمایی مناسب برای اختلاط مخلوط‌های بتنی حاوی میکروسیلیس و پلیمراستایرن بوتادین به‌کار رود.

کلیدواژه‌ها


عنوان مقاله [English]

Prediction Compressive Strength of Concretes Containing Silica Fume and Styrene-butadiene Rubber (SBR) with a Mathematical Model

نویسندگان [English]

  • abbas haghollahi 1
  • Amir Tarighat 1
  • Mohamad Shafieyzadeh 2
1 Shahid Rajaee Teacher Training University
2 Shahid Rajaee Teacher Training University
چکیده [English]

This paper deals with the interfacial effects of silica fume (sf) and styrene-butadiene polymer (SBR) on compressive strength of concrete. Analyzing the compressive strength results of 32 concrete mixes performed over two water-binder ratios (0.35, 0.45), four percentages replacement of silica fume (0%, 5%, 7.5%, 10%) and four percentages of SBR (0%, 5%, 10%, 15%) were investigated. A mathematical model base on Abrams’ law has been proposed for evaluation strength of silica fume-SBR concretes. This simplified model might serve as useful guides for commixture concrete admixtures containing of silica fume and SBR. The accuracy of the proposed model is investigated

کلیدواژه‌ها [English]

  • concrete
  • Silica fume
  • SBR
  • Compressive Strength
  • Mathematical modeling
1. J. Zelic & D. Rusic & R. Krstulovic., "A mathematical model for prediction of compressive strength in cement– silica fume blends", Cement and Concrete Research, No. 34, pp. 2319–2328, (2004).
2. V. Bhikshma & K. Nitturkar & Y. Venkatesham., "Investigations on mechanical properties of high strength silica fume concrete", Asian journal of civil engineering building and housing, No. 10(3), pp. 335-346, (2009).
3. O.Rozenbaum & R.J.-M.Pellenq & H.Van Damme., "An experimental and mesocopic lattice simulation study of styrene-butadiene latex-cement composites properties", Materials and structures pp. 467-478, (2005).
4. Ru Wang & Pei-Ming Wang & Xin-Gui Li., "physical and mechanical properties of styrene-butadiene rubber emulsion modified cement mortars", cement and concrete Research 35, pp. 900-906, (2005).
5. S. Bhanjaa & B. Sengupta., "Modified water–cement ratio law for silica fume concretes", Cement and Concrete Research 33, p. 447- 450, (2003).
6. G. Barluenga & F. Herna´ndez-Olivares., "SBR latex modified mortar rheology and mechanical behavior", Cement and Concrete Research 34, pp. 527–535, (2004).
7. Bing Chen & Juanyu Liu., "Mechanical properties of polymer-modified concretes containing expanded polystyrene beads", Construction and Building Materials 21, pp. 7–11, (2007).
8. A. Beeldens & D.Van Gemert, H.Schorn, Y.Ohama & L.Czarnecki., "From microstructure to macrostructure: an integrated model of structure formation in polymer-modified concrete", Materials and Structures 38, pp. 601-607, (2005).
9. LIU jun & XU Chang-wei, ZHU Xiao-yan & WANG Ling-ling., "Modification of high performances of polymer cement concrete", Journal of wuhan university of Technology-Mater, No. 18(1), pp. 61-68, (2003).
10. João Adriano Rossignol., "Interfacial interactions in concretes with silica fume and SBR latex", Construction and Building Materials 23, pp. 817–821, (2009).
11. Eui-Hwan Hwang, Young Soo Ko., "Comparison of mechanical and physical properties of SBR-polymer modified mortars using recycled waste materials".
12. Ke-Ru Wu, Dong Zhang, Jun-Mei Song, "Properties of polymer-modified cement mortar using pre-enveloping method", Cement and Concrete Research 32, pp. 425-429, (2002).
13. Eui-Hwan Hwang & Young Soo Ko & Jong-Ki Jeon., "Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled artifical marble waste fine aggregate", Journal of Industrial and Engineering Chemistry 14, pp. 265-271, (2008).
14. S. Bhanja & B. Sengupta., "Influence of silica fume on the tensile strength of concrete," Cement and Concrete Research 35, pp. 743–747, (2005).
15. H. Katkhuda & B. Hanayneh & N. Shatarat., "Influence of silica fume on high strength of light weight concrete", World Academy of Science, Engineering and Technology 58, (2009).
16. K.C. Biswal & Suresh Chandra Sadangi., "Effect of superplasticizer and Silica Fume on Properties of Concrete", Proc. of Int. Conf. on Advances in Civil Engineering, (2010(.
17. Sandor Popovics., "Strength and related properties of concrete a quantitative approach", John Wiley and sons, (1998).
18. Mehta & p.kumar., "Concrete: Micro structure", properties and materials, (2006).
19. S. Bhanjaa & B. Sengupta., "Investigations on the compressive strength of silica fume concrete using statistical methods", Cement and Concrete Research 32, pp. 1391–1394, (2002).
20. Mohammad Iqbal khan., "Analytical model for strength prediction of HPC consisting of cementitious", Architecture civil engineering environmental, (2009).
21. ACI Committee 548., "State of the Art Report on polymer modified concrete", ACI 548.3R-95 American concrete Institute, Detriot, (1995).
22. LIU Jun XU Chang & wei ZHU Xiao, yan WANG Ling & ling., "Modification of High Performances of Polymer Cement Concrete". Journal of wuhan university of Technology – Mater, No. 18(1), (2003).
CAPTCHA Image