1. Moghadas Nejad, F., "Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt". Construction and Building Materials, 31: p. 384-388, (2012).
2. Little, D.N. and Jones, D., "Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements". Transportation Research Board National Seminar, San Diego, CA, USA, (2003).
3. Hamedi, G.H., Moghadas Nejad, F.M., and Oveisi, K., "Estimating the moisture damage of asphalt mixture modified with nano zinc oxide". Materials and Structures, 49(4): p. 1165-1174, (2016).
4. Solaimanian, M., "Test methods to predict moisture sensitivity of hot-mix asphalt pavements". Transportation Research Board National Seminar. San Diego, California, (2003).
5. Hamedi, G.H. and Moghadas Nejad, F., "Using energy parameters based on the surface free energy concept to evaluate the moisture susceptibility of hot mix asphalt". Road Materials and Pavement Design, 16(2): p. 239-255, (2015).
6. Cheng, D., "Surface free energy of asphalt-aggregate system and performance analysis of asphalt concrete based on surface free energy". (2002).
7. Bond, A., Hefer, A., and Little, D., "Adhesion in Bitumen-aggregate Systems and Quantification of the effects of water on the adhesive bond", (2005).
8. Hamedi, G.H. and Moghadas Nejad. F., "Evaluating the effect of mix design and thermodynamic parameters on moisture sensitivity of HMA". Materials in Civil Engineering: p. In press, (2016).
9. Hamedi, G.H., "Moisture Damage of Asphalt Mixture Modeling Based on Surface Free Energy Theory", in Department of Civil & Environmental Engineering, Moisture Damage Modeling Based on Surface Free Energy Theory. p. 305, (2015).
10. Khodaii, A., "Evaluating the Effect of Zycosoil on Moisture Damage of Hot Mix Asphalt Using the Surface Energy Method". Journal of Materials in Civil Engineering, (2013).
11. Arabani, M. and Hamedi, G.H., "Using the surface free energy method to evaluate the effects of liquid antistrip additives on moisture sensitivity in hot mix asphalt". International Journal of Pavement Engineering, 15(1): p. 66-78, (2014).
12. Hamedi, G.H., "Evaluating the Effect of Asphalt Binder Modification Using Nanomaterials on the Moisture Damage of HMA". Road Materials and Pavement Design: p. In press, (2016).
13. Van Oss, C.J., Chaudhury, M.K., and Good, R.J., "Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems". Chemical Reviews, 88(6): p. 927-941, (1988).
14. Little, D.N., Bhasin, A., and Hefer, A., "Using surface energy measurements to select materials for asphalt pavement". Transportation Research Board, (2006).
15. Bhasin, A. and Little, D.N., "Characterization of aggregate surface energy using the universal sorption device". Journal of Materials in Civil Engineering. 19(8): p. 634-641, (2007).
16. Hefer, A.W., "Adhesion in bitumen-aggregate systems and quantification of the effects of water on the adhesive bond", Texas A&M University, (2004).
17. Hefer, A.W., Bhasin, A., and Little, D. N., "Bitumen surface energy characterization using a contact angle approach". Journal of Materials in Civil Engineering, 18(6): p. 759-767, (2006).
18. Mercado, E.A., "Influence of fundamental material properties and air void structure on moisture damage of asphalt mixes". Texas A&M University, (2007).
)
ارسال نظر در مورد این مقاله