@article { author = {Hejazi, Mehrdad and Alavi, Mohsen}, title = {Effect of Length and Shredding of Polypropylene Fibres on the Mechanical Properties of Concrete}, journal = {Ferdowsi Civil Engineering}, volume = {29}, number = {2}, pages = {105-118}, year = {2017}, publisher = {Ferdowsi University of Mashhad Press}, issn = {2783-2805}, eissn = {2783-199X}, doi = {10.22067/civil.v29i2.24689}, abstract = {In this research, the effect of micro monofilament polypropylene fibres with three different lengths and five different amounts of fibre in two cases of non-shred and shred fibres on compressive and flexural strengths of concrete has been investigated and compared. The objective has been to obtain the most favourable length and amount of polypropylene fibres for suitable concrete mechanical properties (compressive and flexural strengths). Obtained results show that for both cases of non-shred and shred fibres, the use of 1.8 kg/m3 of polypropylene fibres with a length of 12 mm has a considerable effect on increasing compressive strength. Use of 2.4 kg/m3 of polypropylene fibres of 24 mm long significantly increases flexural strength. Furthermore use of shred fibres causes the increase of compressive and flexural strengths of concrete compared to non-shred fibres.}, keywords = {concrete,Polypropylene Fibres,Length,Shred and Non-Shred,Compressive Strength,Flexural Strength}, title_fa = {تأثیر طول و رشته‌رشته شدن الیاف پلی‌پروپیلن بر خصوصیات مکانیکی بتن}, abstract_fa = {در این تحقیق تأثیر استفاده از الیاف پلی‌پروپیلن تک‌رشته‌ای نازک با سه طول مختلف و با پنج مقدار متفاوت استفاده از الیاف و به دو صورت غیررشته‌رشته و رشته‌رشته بر روی مقاومت فشاری و خمشی بتن مورد بررسی و مقایسه قرار گرفته‌است، تا بهترین طول و مقدار استفاده از الیاف پلی‌پروپیلن جهت دست یابی به بتنی با خصوصیات مکانیکی (مقاومت فشاری و خمشی) مناسب تعیین گردد. نتایج حاصل از این تحقیق نشان داد که در هر دو حالت استفاده به صورت غیر رشته‌رشته و رشته‌رشته، استفاده از kg/m38/1 الیاف پلی‌پروپیلن به طول mm 12 تاثیر قابل توجهی در افزایش مقاومت فشاری داشته است و الیاف پلی‌پروپیلن به طول mm 24 و به مقدار kg/m3 4/2 مقاومت خمشی بتن را به طرز چشم گیری افزایش داده است. همچنین استفاده از الیاف پلی‌پروپیلن به صورت رشته‌رشته در مقایسه با استفاده به صورت غیر رشته‌رشته باعث افزایش مقاومت فشاری و خمشی بتن شده است.}, keywords_fa = {بتن,الیاف پلی‌پروپیلن,طول,غیررشته‌رشته و رشته‌رشته,مقاومت فشاری,مقاومت خمشی}, url = {https://civil-ferdowsi.um.ac.ir/article_30465.html}, eprint = {https://civil-ferdowsi.um.ac.ir/article_30465_ce5300e180e98c077e03af3f8b2ee625.pdf} }