@article { author = {Jafari, A. and Hassani, B.}, title = {Effect of the Boundary Elements on the Seismic Performance of Permanent Shuttering Concrete Panel Structures}, journal = {Ferdowsi Civil Engineering}, volume = {25}, number = {2}, pages = {20-}, year = {2014}, publisher = {Ferdowsi University of Mashhad Press}, issn = {2783-2805}, eissn = {2783-199X}, doi = {10.22067/civil.v25i2.40649}, abstract = {Study of the effect of confinement of concrete on the seismic performance and behavior of permanent shuttering concrete panel structures is the subject of this paper. For this purpose, a few building models with different heights, but similar planar layout of walls, with and without considering the effect of confinement, i.e. execution of boundary elements, are taken into consideration. For this study, the PERFORM 3D software is employed for the modeling of nonlinear behavior of these structures by the possibility of using a multi layer shell element with fiber sections. For finite element modeling of these sections two types of concrete fibers, confined and non-confined, are employed. After modeling and carrying out nonlinear analyses, performance of each of specimens at two different risk levels is determined. The obtained results indicate that although execution of the boundary elements in these structural systems does not considerably improve the seismic performance but the confinement is a major factor in improving some parameters such as ductility, the probable maximum strength and the loss of energy that have a positive influence on the seismic performance of the structure.}, keywords = {Performance Based Design,Bearing Wall System,Concrete Confining,Modeling of Nonlinear Behavior}, title_fa = {بررسی تأثیر اجرای اجزای مرزی در بهبود عملکرد و رفتار لرزه‌ای سازه‌های پانلی پیش‌قالب‌بندی شده}, abstract_fa = {بررسی اثر محصورشدگی بتن بر عملکرد و رفتار لرزه‌ای سازه‌های پانلی که با روش قالب‌بندی ماندگار ساخته می‌شوند، موضوع این مقاله است. به این منظور چند مدل ساختمانی با ارتفاع‌های مختلف و آرایش یکسان دیوارها، با و بدون در نظر گرفتن اثر محصورشدگی (اثر اجرای المان‌‌های مرزی)، مورد مطالعه قرار گرفته است. برای انجام مطالعات با به کارگیری نرم‌‌افزار PERFORM 3D، رفتار غیرخطی این سازه‌‌ها توسط اجزای محدود پوسته‌ای چندلایه‌ی دارای مقاطع الیافی مدل شد. در مدل اجزای محدود این مقاطع از دو نوع الیاف بتنی محصور شده و محصور نشده، برای مطالعه‌ی این اثر استفاده گردید. پس از مدل‌سازی و انجام تحلیل‌های غیرخطی، عملکرد هر یک از نمونه‌‌ها در دو سطح خطر تعیین شده و نتایج مورد بررسی قرار گرفته است. نتایج نشان می‌دهد که اجرای عناصر مرزی در این سیستم‌‌ها نه به‌طور چشمگیر بلکه تنها اندکی عملکرد لرزه‌ای را بهبود می‌بخشد؛ اما عامل محصورشدگی می‌تواند به‌طور قابل‌ملاحظه‌ای پارامترهایی چون نسبت شکل‌پذیری، بیشینه مقاومت محتمل و میزان اتلاف انرژی اعمال شده به سازه را افزایش دهد و رفتار لرزه‌ای این سیستم‌های سازه‌ای را بهبود بخشد.}, keywords_fa = {طراحی مبتنی بر عملکرد,سیستم‌ دیوار باربر,محصورشدگی بتن,مدل‌سازی رفتار غیرخطی}, url = {https://civil-ferdowsi.um.ac.ir/article_27848.html}, eprint = {https://civil-ferdowsi.um.ac.ir/article_27848_d43372a0e26f0b7161770719c47120d0.pdf} }